Ordering Informaton and Discount Pricing call 800-474-3947 or 281-829-2448

Prices shown reflect Manufuturer's Suggested Retail Price (MSRP)

       SERVER RACK                                                   WORK CENTER



LANSTAR Modular Technical Rack System or WorkCenter System is made up of several basic units. These basic units are the Frame Assembly, Shelving, Worksurfaces and Accessories.

Step 1: Select the Frame Assembly - The Basic Frame starts with two (2) P/N FC-7032UL - Uprights with 32"� legs. Added to the Uprights are (2) Stretcher Bars. The size of the Stretcher Bars is based on the width necessary for the Frame Assembly to meet your space requirements. To double the width of a unit, we add a Center Upright and two Stretcher Bars. The Upright Center can be either the FC-72CU or the FC-7022UL.

Step 2: Select the Shelving - There are three slot mount shelf depths, for each width of frame, from which to choose: 16", 20" and 24". The 16"� shelf is light duty shelf with tilt capability, typically used as a monitor riser shelf and to hold peripheral equipment. The 20" and 24"� shelves are used to hold servers and larger equipment. To add equipment at the bottom of the unit you have several options: (1) put the equipment on the floor.; (2) Locate a slot mounted shelf at the lowest frame position, or (3) use Roll Out Floor Tower Trays.
 

Step 3: Select the Worksurface - The LANSTARâ„¢ standard worksurface is 36"� deep and comes in the following widths: 23", 29", 35", 59", 71"and 95".  The worksurfaces come with T-Mold or Oak Bullnose. Special sizes and laminates can be custom ordered.

Step 4: Select the Accessories - Cable and Power Management; Power Management Integration; End Panels; Cabinets; and Keyboard Management.